Shoulderpod Z5 - Splitter clamp
3D printed clamp for mounting the Belkin Audio+Charge USB-C splitter on your Shoulderpod G2 video grip
The Z5 is a custom-made clamp designed to prevent your Belkin splitter from dangling around once connected to your Android phone.
DESIGNED FOR PROFESSIONAL USE
Tidy up your Android video setup.
The Z5 clamp is the solution you need for holding the Belkin USB-C splitter firmly in your G2 video grip.
The sliding socket has been custom-designed to fit tightly into any of the G2 cold shoes, but the most convenient place to mount it is on the lateral cold shoe above the handle.
IMPORTANT: While the Z5´s socket might work with other cold shoes, we can’t guarantee it will fit tightly or without getting damaged.
The Z5 has been 3D printed using an automotive-grade fibber-reinforced composite polymer for supporting tough working conditions.
Shoulderpod Z5 clamp holding a Belkin USB-C splitter for microphone and battery connection.
MOUNTING INSTRUCTIONS
All you need is a small X-screwdriver.
For mounting the Belkin Audio+Charge USB-C splitter:
Unscrew the clamp using a small Philips X-screwdriver.
Slide the splitter inside the clamp. Make sure to mount the splitter in the correct orientation.
Press the clamp with one hand and tighten back the screw in position. Do not overtighten so you don’t strip the inner thread.
Check the Belkin splitter is correctly clamped.
Mount the whole setup into the G2 by sliding the socket into the cold shoe. We recommend using the lateral cold shoe on the handle side for best results.
WHY 3D PRINTING?
The best solution for manufacturing custom-made products for you.
3D printing allows us to offer custom-designed products to a small group of customers at an affordable price.
We can do this by avoiding the high cost of tooling and injection molding, which only make sense for large production runs. The reliability of 3D printed materials is now on par with traditional manufacturing processes and can even meet automotive and aerospace specifications. While surface quality has drastically improved during the last years, it is important to understand that surface quality of 3D printed parts is not yet as smooth as an injection-molded or machined part would be, but this is only a small price to pay for having access to products that can radically improve our workflow.
DISCOVER THE Power POD
A kit with all you need to plug an external battery and a microphone to your smartphone.
Most smartphone models no longer have a 3.5 mm audio jack, so it is not straightforward to connect an external microphone and a power bank simultaneously. To solve this issue while keeping your setup tidy, we have developed the Power POD, a bundle that includes all the accessories you need.
